Skip to main content
Create an environment, add an SO-101 digital twin, and explore its controls in simulation. You need a Cyberwave account and a browser; no physical robot is required.

Watch the walkthrough

Follow the walkthrough

1

Create an environment

Go to the Cyberwave dashboard and click Blank environment below the scene prompt. Give it a name (e.g. “Hello Robot”), then click Create environment. A description is optional and lives under Advanced Options. From template is a separate path for starting with a prepared scene.
2

Add a digital twin

Finish or dismiss the editor tour first. In the empty scene, click Add from Catalog, or use Add to scene (+) → Add from Catalog. Select the SO-101 from The Robot Studio, whose registry ID is the-robot-studio/so101. Search for SO101 in the picker and check the asset identity before adding it; similarly named imported variants can have different joints and controls.
3

Choose the simulation engine

In the top bar of the environment editor, switch from Edit to Simulate, then open Simulation setup (or the Simulate menu). Choose MuJoCo for higher-fidelity server physics, click Start Simulation, and wait for the run to report Running before sending commands. Entering Simulate alone does not start a MuJoCo run.For an optional lightweight browser preview, select Playground Mode and turn on Enable Physics. Playground runs in the browser and has limited physics; it does not require a cloud run. A stopped historical MuJoCo run is separate from Playground’s current physics state.
4

Open the robot's controls

Select the SO-101 in the scene tree and open its Commands panel. The canonical asset can inherit keyboard controls from its asset setup; use those controls when present instead of assigning a second controller. If keyboard controls are missing, open Workbench → Controllers and inspect the robot’s assigned controls. A panel offering only Enter joint values is a joint-target interface, not the keyboard control panel; check that you added the intended asset.
5

Move the robot

Activate the robot’s keyboard controls and use the bindings displayed in that panel. Move focus out of text fields before pressing a binding. Double-click the scene-tree row outside its name to frame the robot. Confirm that the arm moves in the viewport and its joint readings change. Stop the MuJoCo run when finished, or turn off Playground physics.
Continue once you have observed joint motion using the selected engine. From here you can explore different controllers, add cameras, or connect real hardware.

Next steps

Python SDK

Full guide covering SDK setup, hardware connection, and application development

Browse the catalog

Explore all available robots, cameras, and sensors